Stands Racks Clamps

Product Details:

Fisher type clamps, for holding burettes, complete body of die-cast metal making it light weight, durable and sturdy. Provided with a spring loaded positive grip and release. The special design provides vice-like grip to the burette for a positive clamping. Bosshead clamp secures it firmly at desired position on the rod of about 13mm diameter.

Additional Information:

• Item Code: CHGAA230
• Production Capacity: 200-500 Pieces
• Delivery Time: 7-10 Days

Product Details:

Two metal strips mounted in a wooden handle, with sliding collar and free end curved to accept tubes of diameter 22-32mm.

Additional Information:

• Item Code: CHGAA081
• Production Capacity: 500-600
• Delivery Time: 15-20 days
• Packaging Details: Depends on Order

Product Details:

A single piece, moulded plastic test tube stand has 2 rows of 6 holes each to take up to 12 test tubes – 4 holes of about 25mm diameter and 8 holes of 16mm diameter. also has five vertical pegs for draining. The single piece moulding makes it long-lasting and durable.

Additional Information:

• Item Code: CHGAA123_1
• Production Capacity: 150-200 pieces
• Delivery Time: 10-12 Days in all over India
• Packaging Details: Depends on Order

Product Details:

Made of sheet metal, from thick 18 SWG sheet, 3-tiered construction.
Made of Aluminium, Anodized,

Sizes available are:

Additional Information:

• Item Code: CHGAA132
• Production Capacity: 100-150 Piece Per Day
• Delivery Time: 12-15 Days in all over India
• Packaging Details: Depends on Order

Product Details:

Triangular top, made of Mild Steel wire. Lower end of legs covered with plastic cap to avoid scratching the work surface.

Specifications:

• Size available is 125 × 200 mm (length of side × height).

Additional Information:

• Item Code: CHGAA145
• Production Capacity: 50
• Delivery Time: 5-9 days
• Packaging Details: Disclose after order placed

Product Details:

Sturdy and durable, made of hardwood, with holes of about 45mm diameter for dropping bottles up to 60mL capacities.

Additional Information:

• Item Code: CHGAA100
• Production Capacity: 80-100 Pieces
• Delivery Time: 7-10 Days

Product Details:

Most commonly used test tube stand. Rack with six holes is supported at each end by a vertical column. The top plate has 2 holes for 25mm tubes and 4 holes for 16mm tubes with corresponding recesses at the bottom plate just below the holes. Bottom plate also has 6 vertical pegs for drying test tubes.

Additional Information:

• Item Code: CHGAA123

Product Details:

Made of rugged cast iron for extra stability, comes with a baked, chemical resistant, paint finish. The bridge between two support arms has threaded hole for 12.5mm diameter rod at the center.

Specifications:

• Length of side about 200 mm

Additional Information:

• Item Code: CHGAA091_1

Product Details:

A simpler, stable and economical base made of diepressed sheet metal with threaded hole for 12.5mm diameter rod at the center of one of the shorter sides. with 9.5mm Rod

Specifications:

Available in Sizes:

• 160 × 100 mm
• 200 x 125 mm
• 250 x 160 mm

Additional Information:

• Item Code: CHGAA093_1

Product Details:

A bigger, heavier, A-shaped base of pressure die cast alloy metal has raised bridge between the two arms. The bridge has a vertical hole with a plated metal tightening screw for vertical mounting of rods up to 13mm diameter. the design permits the mounting of even unthreaded rods. Provided with leveling screws.

Specifications:

• Length of side about 200 mm.

Additional Information:

• Item Code: CHGAA092

Product Details:

A heavier, more stable, cast iron tripod base, finished matte black, having central raised portion with a circular hole to accept rods up to 12.5mm diameter. Provided with a plated metal, threaded thumb screw for securely clamping the rods.

Additional Information:

• Item Code: CHGAA095

Product Details:

Comprises wooden base and top with single row of holes, without pegs. Clips together quickly and easily with two moulded ABS plastic supports – one on either side. Supplied flat for compact storage when not in use.

Specifications:

• Height 11 cm
• Can accepts 6 tubes of up to 21 mm diameter

Additional Information:

• Item Code: CHGAA120

Product Details:

Two wooden pieces connected together by a spring for opening / closing of jaws.

Specifications:

• Length about 18 cm
• Accepts tubes of Diameter 11-19 mm

Additional Information:

• Item Code: CHGAA080_1

Product Details:

To hold one burette and one funnel simultaneously. Polished hard wood with cork lined jaws and moulded plastic screws. Base fitted with non-skid feet for stability.

Specifications:

• Overall height 490 mm
• Base Size 330 × 110 mm

Additional Information:

• Item Code: CHGAA191

Product Details:

Made of seasoned hardwood, well polished, with single row of holes. Vertical pegs are provided for quick drying of the test tubes. For Six Test tubes, with six pegs, two holes of 32mm diameter and four holes of 22mm diameter. For Six Test tubes, with six pegs, two holes of 32mm diameter and four holes of 22mm diameter.

Additional Information:

• Item Code: CHGAA130_1

Product Details:

Made of metal sheet, Z type, new design, single piece fabrication, one row of holes of 30 mm diameter, the second row of holes of 25 mm diameter and third row of hole of 16 mm diameter

Additional Information:

• Item Code: CHGAA134

Product Details:

Two metal strips mounted in a wooden handle, with sliding collar and free end curved to accept tubes of diameter 22-32mm. Metal strips of MS, Chrome Plated

Specifications:

• Diameter: 22-32 mm

Additional Information:

• Item Code: CHGAA081_1

Product Details:

For use with laboratory stand in school and colleges. Die-cast metal alloy, two V-grooves orthogonal to each other to accept rods up to 16.5 mm diameter, which are secured through nickel - plated thumb screws.

Additional Information:

• Production Capacity: 500-600
• Delivery Time: 10-12 Days
• Packaging Details: Depends on order

Product Details:

Metal wire, rolled flat at joint, jaws corrugated inside.Material Used is Stainless Steel.

Sizes Available 150mm and 200 mm

Additional Information:

• Item Code: CHGAA162
• Production Capacity: 100-150 Pieces
• Delivery Time: 5-7 Days

Product Details:

Completely made of seasoned hardwood, well-polished with moulded plastic clamping screws. Rod size approx. 460×16mm (height ×diameter).
Available for Single Burette and Double Burette.

Additional Information:

• Item Code: CHGAA190
• Production Capacity: 100-200 Pieces Per Day
• Delivery Time: 10-12 days in all over India
• Packaging Details: Depends on Order

Product Details:

The draining rack provides excellent assistance for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are securely mounted with the help of screw-nuts. Bottom of the rack has a tray for collecting the drained water seeping down from the draining objects, which can be further transferred to a container via drain tube. All plastic construction makes it non-corrosive, and nonstaining.

Additional Information:

• Item Code: CHGAA281
• Production Capacity: 150-200 Piece
• Delivery Time: 15-20 Days
• Packaging Details: Depends on order

Product Details:

Die-cast alloy metal body, accepts square and tubular sections up to 16.5mm diameter at right angles to each other. Will also hold flat articles such as rulers, magnets, drawing board metal / wooden strips etc.

Specifications:

• Dimensions 30 × 30 × 50 mm

Additional Information:

• Item Code: CHGAA039

Product Details:

To gain a strong foothold in this industry, we are devoted towards offering a wide gamut of Clamp Retort Three Pronged. The offered product is well designed by our professionals utilizing optimum quality material and advanced technology. This product has plated metal thumb screw for tightening the clamp jaws. Besides, we provide this product after checking properly on numerous parameters in order to assure its flawlessness.

Features:

• Longer functional life
• Anti-corrosiveness
• Require minimum maintenance

Additional Information:

• Item Code: CHGAA040
• Production Capacity: 50-100 Pieces Per Day
• Delivery Time: 10-12 Days
• Packaging Details: Depends on order

Product Details:

Die-pressed, rectangular, steel base with threaded hole for 12.5mm diameter rod at the center of one of the shorter sides. Finished in blue. Base is recessed at the bottom with two shorter sides having rubber feet for added stability and preventing damage to the work-surface.

Specifications:

Available in Sizes:

• 160 × 100 mm
• 200 x 125 mm
• 250 x 160 mm
• 315 x 200 mm

Brand:OPTEC

Additional Information:

• Item Code: CHGAA094_1

Product Details:

Well polished hardwood, to hold 12 pipettes horizontally – 6 on each side.

Specifications:

• Approximate size 23 × 26 × 12 cm (H × W × D).

Additional Information:

• Item Code: CHGAA110

Product Details:

Completely detachable stand, moulded in polypropylene, is totally non-corrosive and unbreakable, and can hold a total of 12 pipettes, 6 on each side. This autoclavable stand has two sides attached to each other through three metallic rods coated with polypropylene.

Additional Information:

• Item Code: CHGAA112

Product Details:

For general laboratory use. Made of thick metal wire that provides durability and ruggedness, completely covered with plastic layer to avoid any rusting of metal wire, ensuring longer life. Also provided with an arrangement for hanging on the wall.

Additional Information:

• Item Code: CHGAA280-1