Electrical And Electrical Circuit

Product Details:

The students can study speed/voltage relationship, blade number and arrangement, maximum RPM's and voltage, drive shaft ratio and wind speed effects on placing the instrument in front of a fan or in natural wind. A rubber belt drives motor on rotating the pulley fitted with shaft. The No. of wanes in instrument can be changed as per requirement by just fixing these inside the slots given in the cylindrical wooden block.

Additional Information:

• Production Capacity: 500 Pieces
• Delivery Time: As per order quantity
• Packaging Details: As per order quantity

Product Details:

Shows the conversion of mechanical energy into electrical energy and principle of working of simple AC and DC dynamos. Complete assembly mounted on a base and capable of generating both AC and DC simultaneously as indicated by the glowing of bulb present on the base. A twopole armature wound from enameled copper wire on insulated bobbin is mounted in shaft supported on moulded plastic legs on either side and is positioned between two curved iron strips. The shaft carries split ring commutator on one side for DC output and slip ring commutator on the other side for AC output, which is available through 4mm sockets mounted on respective sides and selectable through a sliding switch. Magnetic field provided by a permanent magnet on top of curved strips. The complete arrangement driven by a hand-cranked bigger driving wheel with handle through an endless rubber belt.

Product Details:

All the components of an electric bell are mounted on a large panel for easy demonstration to the group of students. Provides complete dissected view with all components and wiring clearly visible with large sized parts. Operates on 3-4 volts DC. Shows the working of a simple electric bell.

Additional Information:

• Item Code: PHIAA631
• Production Capacity: 150-200 Pieces Per Day
• Delivery Time: 15-20 Days in all over India
• Packaging Details: Depends on Order

Product Details:

Shows the conversion of mechanical energy into electrical energy and principle of working of simple AC and DC dynamos. Complete assembly mounted on a base and capable of generating both AC and DC simultaneously as indicated by the glowing of bulb present on the base. A two-pole armature wound from enameled copper wire on insulated bobbin is mounted in shaft supported on moulded plastic legs on either side and is positioned between two curved iron strips. The shaft carries split ring commutator on one side for DC output and slip ring commutator on the other side for AC output, which is available through 4mm sockets mounted on respective sides and selectable through a sliding switch. Magnetic field provided by a permanent magnet on top of curved strips. The complete arrangement driven by a hand-cranked bigger driving wheel with handle through an endless rubber belt

Additional Information:

• Item Code: PHIAA230
• Production Capacity: 40-50 Pieces Per Day
• Delivery Time: 15-20 Days in all over India
• Packaging Details: Depends on order

Product Details:

A very low inertia electric motor with plastic impeller fitted on a sheet metal stand. Connection is made via. 4mm socket fitted just below the impeller. A output voltage can be monitored with LED or multimeter when impeller is driven by a blower or high speed wind.

Additional Information:

• Delivery Time: As per order Quantity
• Packaging Details: As per order Quantity

Product Details:

Water Turbine With Dynmo Model for demonstration purpose is an Apparatus to show the conversion of mechanical energy into electrical energy by using it as a water turbine to drive a dynamo for producing electricity. The plastic impeller housed in a cast metal casing with a clear Perspex front that allows viewing of its functioning. The inlet tube provided at the top and outlet tube on the side, both tubes riffled for tubing connectors. A dynamo mounted along the impeller shaft glows the LED indicating the conversion of mechanical energy to electrical energy

Additional Information:

• Item Code: PHEAA080
• Production Capacity: 150-200 Per Day
• Delivery Time: 15-20 days in all over India
• Packaging Details: Depends on order

Product Details:

The spectacular performance of high frequency coil will leave an impression on every student. Light emitting diode glow brightly when held near the coil, a 60W light bulb will light up, harmless spark showers and gigantic sparks can be produced by using two metallic circular discs. Compact version of the classic Tesla design generates high frequency high voltage. An adjustable spark gap controls both frequency and output up to a maximum of over 50000V. We can demonstrate the unusual properties of high frequency electrical phenomena and it develops excitement in students to ask questions related to the science and technology. We can understand many important topics such as transformer, electromagnetism, resonating electrical circuits, electric inductance, capacitance and electrical power transmission. The whole assembly fitted inside a transparent covered acrylic base help to see each and every parts of the Tesla coil easily. It operates on 110 or 220V AC. The whole kit includes with two alluminium plate discs, a lamp sockets with a lamp, a LED, a discharge electrode and copper wire.

Additional Information:

• Item Code: PHIAA320
• Production Capacity: 12-15 days Per Day
• Delivery Time: 15-20 days in all over India
• Packaging Details: Depends on Order

Product Details:

We offer a wide range of panel meter which include Ammeter, Voltmeter in dersired range. Both in single and double range.

Additional Information:

• Delivery Time: As per order quantity
• Packaging Details: As per order quantity

Product Details:

A completely self contained kit mounted on a sturdy sheet metal box and provides all the necessary components for demonstrating the conversion of solar energy into electricalenergy, sound energy and light energy. Comprises a solar cell with a lead terminating into 4mm plug for output that can be plugged in respective sockets on top of themetal box.Input sockets provided and marked clearly for cell holder (for battery charging-storage of energy), voltmeter, bulb, buzzer and electrical motor.

Additional Information:

• Item Code: PHJAA000
• Production Capacity: 100-120 Pieces
• Delivery Time: 5-7 Days

Product Details:

Complete kit to study the behaviour of transistor in various configration. The kit comprises of 4 meter. Two Ammeter and 2 Voltmeter.

Additional Information:

• Production Capacity: 10-15 Per Month
• Delivery Time: 10-15 Days

Product Details:

For determination of unknown resistances or comparison of resistances. This substantial Four and Two Gap bridge has broad, heavily plated brass strips mounted on a base. Terminals with 4mm sockets are provided to reduce unwanted resistance to a minimum and the gaps are closed by removable plated brass strips, which are held in position by the terminals. The 24SWG bare constantan wire is stretched along the top of a meter scale graduated in millimeters and figured every centimeter. The ends of the wire are securely clamped to the terminating strips to reduce end errors to the negligible level. Wire easily replaceable if damaged or broken. Supplied WITH JOCKEY.

Additional Information:

• Item Code: PHIAA500
• Production Capacity: 80-100 Pieces
• Delivery Time: 5-7 Days

Product Details:

Same specifications as per Cat. No. 1090760 but with non-inductively wound coils of manganin wire, double silk covered with resistances adjusted to high precision. Specific ranges are available on request.

Specifications:

• Accuracy: ± 0.05%.
• Range: 1-50 Ω

Additional Information:

• Item Code: PHIAA360
• Production Capacity: 250-500 Pieces Per day
• Delivery Time: 15-30 days in all over India
• Packaging Details: Depends on Order

Product Details:

Useful as a potential divider for various electrical experiments such as in null point detection, works on the principle of variation of resistance of a conductor with length. Comprising a 24SWG bare constantan wire stretched along a meter rule, subdivided in centimeters and millimeters and clamped to stout plated brass end plates. The clamping system is designed to make good electrical contact with the wire at the exact ends of the scale thus leaving virtually no margin for 'end errors'. The terminating strips are provided with heavy-duty 4mm socket terminals and the complete assembly ismounted on a long baseboard. Supplied WITH JOCKEY.

Single Wire (1m) on Polished Wooden Base. Double Wire (2m) on Polished Wooden Base.
Single Wire (1m)on strudy Anodized Aluminium Channel Section Base.
Double wire (2m) on sturdy Anodized Aluminium Channel Section Base.

Additional Information:

• Item Code: PHIAA520
• Production Capacity: 50-100 Pieces Per Day
• Delivery Time: 10-12 days in all over India
• Packaging Details: Depends on Order

Product Details:

A model of the simplest form of DC electric motor, having 2-pole armature wound with enameled copper wire on insulated plastic bobbin, and a magnetic field provided by a removable permanent magnet. The construction of themodel is completely open with all components easily identifiable and functioning clearly observable. A disc-type commutator is incorporated and external connection to the phosphorus bronze bushes is by means of a pair of 4mm colour coded sockets. Themotor operates on 6-8 volts DC.

Product Details:

Optec electricity kit is made of bread board with discrete component shaving 4mm plugs. In this kit, the components are stored in a heavyduty carry-case. This kit consists of the necessary parts needed to workthrough a complete introduction to basic electricity. The componentsare easy to set up and enable the user to perform a wide variety ofexperiments. It will provide the perfect introduction to the basicfundamentals of current electricity. It is equipped with excellent tools,which can be utilized for the more advanced studies. This kit helps thestudents to observe and understand how electrical instruments such asmotor, relay components work and their characteristic behavior instatic and dynamic circuits. The components provided in the kit are:
Cell holder with batteries 2 Bridging plugs 4Resistor 100Ω 2 Multimeter 2Resistor 220Ω 1 Potentiometer 100Ω/5W 1Lamp Holder 1 Toggle switch 1Capacitor 1000μF/16V 2 Push to ON switch 1Inductor coil 1 Compass 1Clips 5 Relay 12V DC 1Motor small 2 Plastic fan 2C core with clips 1set Coil 400 turns 1Coil 1600 turns 1 Reversing switch 2Buzzer 1A variety of experiments can be performed using the Kit like :(I) Verification of Ohm's law(ii) Verification of Kirchhoff’(iii) Potential differenceor electro-motive force measurement(iv) Current measurement(v) Voltage measurement(vi) Charging and discharging of a capacitor(vii) Combination of capacitors in series and parallel(viii) Measurement of electrical resistance(ix) Addition of resistances in series and in parallel(x) Use of Buzzer in an electrical circuit(xi) Use of relay in an electrical circuit(xii) Understanding of transformer and its working(xiii) Understanding of dynamo and its working(xiv) Transformation of electrical energy into mechanical energy(xv) Working of electromagnet(xvi) Study of electric bulb(xvii) Direction of magnetic fieldAdditional use of cathode ray oscilloscope makes this kit a versatiletool for the electricity experiments.

Additional Information:

• Item Code: PHIAA590
• Production Capacity: 40-50 Pieces Per Day
• Delivery Time: 15-20 Days in all over India
• Packaging Details: Depends on Order

Product Details:

We are ranked amongst the foremost firms, engaged in offering a qualitative range of Daniel Cell Electrical Circuit. Provides satisfactory performance and constant E M F over continuous use. Comprising a heavy-gauge copper outer vessel with an internal perforated shelf for copper sulphate crystals, a porous pot, and an amal gamated zinc rod fitted with a wooden supporting cap. The zinc rod and copper vessel are each provided with a 4mm socket terminals. The cell has an EMF of 1.1V approx., with a working capacity of about 0.85L.These products used for both AC and DC operations with motor/generator with easily changeable parts to convert an AC into DC (motor/generator). Our offered products are completely checked by quality experts under strict parameters meeting all the standards. Customers can avail these products from us at nominal rates.

Features:

• Professionally designed
• Used for both AC and DC operations
• Enhanced durability

Specifications:

• Sizes of the components (height ×diameter) are
• Copper vessel: 130 × 90 mm
• Porous pot: 150 × 50 mm
• Zinc rod: 150 × 12 mm

Additional Information:

• Item Code: PHIAA150
• Production Capacity: 150-200 Pieces Per Day
• Delivery Time: 15-20 days in all over India
• Packaging Details: Depends on Order